Research peptides are usually supplied as a lyophilised (freeze-dried) powder: a dry, porous cake in a sealed vial. Removing most of the water removes the main driver of chemical breakdown, so the dry material is typically far more stable in storage and transit than the same peptide held as a solution. Storage in the laboratory is then a matter of slowing the chemistry that remains: keep the material cold, dry and in the dark, open vials only when needed, and inspect the cake when a shipment arrives.
This article covers storage conditions and stability factors for lyophilised research peptides in Australia. It describes handling of the material, not any use of it. All Au Peptide Labs materials are supplied strictly for laboratory research use. They are not for human or veterinary use, and not for human consumption.
Why the dry cake is the starting point
Lyophilisation freezes a solution and then removes ice by sublimation under vacuum, leaving a solid cake. Residual moisture still matters. Water that remains in the powder adds to gross weight and can support hydrolysis during storage, which is why tightly closed containers matter.
A lyophilised peptide is more stable than the same sequence in solution, but it is not inert. Nilsson, Driscoll and Raleigh, working with model peptides, reported that deamidation — a common degradation pathway at asparagine residues — also occurred when the peptides were stored as lyophilised powders, and that the related impurities could be resolved by reverse-phase HPLC (Nilsson et al., 2002). Dry storage slows degradation. It does not make the chemistry irrelevant. A short definition is on aupeptidelabs.com.au/resources/glossary/lyophilisation, and the longer laboratory reference page is aupeptidelabs.com.au/resources/storage-and-stability.
Temperature
Heat accelerates the chemical pathways that reduce purity over time. As a general laboratory practice, lyophilised peptides are therefore held cold, with colder storage reserved for longer horizons. The specification and certificate for the individual material take precedence over any general rule. The usual pattern is:
- For shorter periods (on the order of weeks), refrigeration at around 2–8 °C is commonly adequate for dry material.
- For longer periods (months and beyond), a freezer at around −20 °C, or colder, slows degradation further.
Those ranges line up with conditions used in formal stability study designs. ICH Q1A(R2) describes how the quality of a substance can vary with time under temperature, humidity and light, and it includes long-term storage conditions of 5 °C ± 3 °C (that is, 2–8 °C) for material intended for a refrigerator and −20 °C ± 5 °C for material intended for a freezer (ICH Q1A(R2)). The guideline is a framework for designing controlled studies, not a substitute for the storage statement on a given certificate, and it does not assign a shelf life to a particular research peptide. Ordinary laboratory refrigerators and freezers can provide these ranges if the temperature is monitored and vials are stored promptly after inspection.
Humidity and the vial seal
ICH Q1A(R2) also treats sensitivity to moisture as a reason to test storage conditions carefully. Keep vials tightly closed in their original closure; a compromised stopper or cracked vial is a reason to set it aside. Minimise how often a vial is opened, because each opening can admit moist air. Do not leave a cold vial open in a warm, humid room, where condensation can form on the cake.
A collapsed, shrunken, cracked or melted-looking cake, a cake that looks wet, discolouration compared with a normal white-to-off-white appearance, or condensation inside the vial are all visual signs that lyophilisation may have been faulty or that the material has later been exposed to heat or moisture. In those cases the vial should be set aside, and the batch number checked against the published certificate.
Light, oxygen and oxidation
Light and oxygen are the other everyday factors. Peptides containing oxidation-sensitive residues, such as cysteine, methionine, histidine, tyrosine and tryptophan, are particularly susceptible to oxidation, and light exposure can accelerate it. Store lyophilised vials in the dark, or in packaging that limits light, and keep closures tight so that unnecessary air exchange is avoided.
The main degradation pathways
When peptides do degrade, the chemistry usually falls into a small number of recognised pathways, all accelerated by heat, moisture and time. A classic review by Manning, Patel and Borchardt summarised chemical instability as including proteolysis, deamidation, oxidation, racemisation and beta-elimination, and physical instability as including aggregation, precipitation, denaturation and adsorption to surfaces (Manning et al., 1989).
In laboratory storage terms, the pathways most often discussed for research peptides are oxidation of susceptible residues, which light can accelerate; deamidation of asparagine or glutamine, which can occur in the solid state as well as in solution; hydrolysis, which is why residual moisture and a sound vial seal matter; and aggregation, more often discussed once material is in solution, and promoted by agitation and by repeated freezing and thawing of a solution. Each pathway can produce new peaks on a chromatogram, which is how formal stability studies detect change over time. Published reports for Au Peptide Labs batches are at aupeptidelabs.com.au/coas.
Material in solution, and laboratory reagents
Once a peptide is in solution it is generally less stable than in its dry form, so laboratories typically keep the lyophilised cake in its intended cold, dry, dark storage until the material is needed, and then follow their own internal SOP for any subsequent handling. This article does not describe how to return a powder to solution, and it does not give volumes or other preparation instructions.
Bacteriostatic water is a laboratory reagent supplied for research use and is listed among research laboratory supplies at aupeptidelabs.com.au/product/bacteriostatic-water and aupeptidelabs.com.au/research/lab-supplies. It is not a storage instruction for the lyophilised peptide, and it does not change the basic conditions above: dry material is held cold, dry and in the dark. For material already in solution, repeated freezing and thawing, and on-arrival checks in more detail, see aupeptidelabs.com.au/resources/storage-and-stability.
A short storage checklist
For lyophilised research peptides in the laboratory:
- Inspect the cake and the closure on arrival. Set aside any vial that looks wet, collapsed, discoloured or poorly sealed.
- Confirm that the batch number on the vial matches the certificate.
- Place sound vials into the storage condition named on the specification or certificate — commonly 2–8 °C for shorter periods, or around −20 °C for longer periods.
- Keep vials closed, dry and protected from light. Open them only when needed.
- Do not treat room temperature, a sunny bench, or a repeatedly opened vial as equivalent to controlled storage.
Storage cannot improve a batch that was out of specification to begin with, and it cannot replace a readable certificate. It can, however, avoid adding heat, moisture and light to a material that was sound when it arrived.
For laboratory research use only. Not for human or veterinary use.
References
- International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use. ICH Harmonised Tripartite Guideline Q1A(R2): Stability Testing of New Drug Substances and Products. Current Step 4 version, 6 February 2003. https://database.ich.org/sites/default/files/Q1A(R2)%20Guideline.pdf
- Manning MC, Patel K, Borchardt RT. Stability of protein pharmaceuticals. Pharmaceutical Research. 1989;6(11):903–918. https://pubmed.ncbi.nlm.nih.gov/2687836/
- Nilsson MR, Driscoll M, Raleigh DP. Low levels of asparagine deamidation can have a dramatic effect on aggregation of amyloidogenic peptides: implications for the study of amyloid formation. Protein Science. 2002;11(2):342. https://pmc.ncbi.nlm.nih.gov/articles/PMC2373442/